Olet syöttänyt alla oleviin korostettuihin kenttiin virheellisiä merkkejä sisältävän arvon. Tarkista syöttämäsi arvot ja käytä vain sallittuja merkkejä.

Tuote ei välttämättä vastaa täysin tarkasti hakuasi

Olet aiemmin ostanut tämän tuotteen. Katso tilaushistoriasta

 
 

DFROBOT DFR0767

IoT Router Carrier Board, BCM2711, ARM, Cortex-A72, Raspberry Pi Compute Module

DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
DFROBOT DFR0767
×

Kuva on vain kuvaavaa tarkoitusta varten. Lue tuotekuvaus tarkempia tietoja varten.

Valmistajan osanumero:
DFR0767
Tilauskoodi:
3879661
  • Kirjoita mukautettu osanumerosi yllä olevaan tekstikenttään
  • Lisätty enimmäisosanumerot.
    Poista vanhoja merkintöjä lisätäksesi uusia.

Osanumero tallennettu

Part Number Saved

ECAD / MCAD
Supply Frame Models Link

Tuotetiedot

Haluatko nähdä samanlaisia tuotteita? Valitse vain haluamasi määritteet alla ja paina painiketta ×


:
Broadcom

:
Raspberry Pi Compute Module

:
ARM

:
Cortex-A72

:
BCM2711

:
BCM2xxx

:
1 x Compute Module 4 IoT Router Carrier Board Mini

Löydä vastaavia tuotteita Voit etsiä vastaavia tuotteita valitsemalla ja muokkaamalla yllä olevia valintoja.

Tekniset asiakirjat (0)

Tuotteen yleiskatsaus

Raspberry Pi compute module 4 IoT router carrier board mini. This is an internet expansion board based on the Raspberry Pi compute module 4. When connecting with a gigabit network card via PCle, it brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage and higher stability for a long time work compared with a USB network card. Besides with a mini size of 55 x 62mm, the board still retains the characteristic GPIO pin header of Raspberry Pi which makes it applicable for connecting other actuators, sensors and smart cooling fan. Furthermore, there is also a USB2.0 interface that can be connected to mobile hard drives, printers, WI-FI modules, LTF modules, etc. The powerful performance of BCM2711 4 core 1.5GHz Cortex-A72 and the rich software support in the Raspberry Pi community make this board a solid foundation for building high-performance gateways, smart routers and home IoT platforms.
  • Provides OpenWRT open-source router system
  • Compatible with raspberry OS, Ubuntu server and other raspberry pi systems
  • Ethernet: ETH1: compute module 4 built-In and ETH2: PCI express 1000BASE-T NIC
  • 1x USB-C: power only and 1x USB-C: USB 2.0 high speed
  • Storage card: microSD slot (Only modules without eMMC supported)
  • GPIO: 26pin GPIO compatible with raspberry pi
  • Power supply: USB-C 5V/3A
  • Operating temperature range 0°C to 80°C
  • Connected to peripherals and used as a mini-NAS, wireless network bridge, or LTE Internet terminal

34 Varastossa

Lisää tuotteita varastossa päivämäärästä 31.8.2024 alkavalla viikolla
Tämän tuotteen normaali toimitusaika on 11 viikkoa.
Lisätietoja

Tilaus ennen klo. 18:00

Se saapuu perille seuraavana arkipäivänä

Markkinaolosuhteista johtuen toimitusajat ovat vain yleisiä ohjeita, ja ne voivat muuttua lyhyellä varoitusajalla

41,55 €

Hinnoittelu ei ole käytössä. Ole hyvä ja ota yhteys asiakaspalveluun.

Hinta tuotteelle:
kappale
Useita: 1 Vähintään: 1
  • 1+
Määrä Hinta Hintasi
 
 
1+ 41,55 €
Kampanjahinta
Sopimushinta
Hinta vain verkossa
Sopimushinta vain verkossa
 
Määrä Hinta Hintasi
 
 

Hinnoittelu ei ole käytössä. Ole hyvä ja ota yhteys asiakaspalveluun.

No longer stocked:: No Longer Manufactured::
Lisää ostoskoriin Lisää ostoskoriin Ennakkotilaus
Lisää
Rajoitettu tuote
Kirjoita rivin huomautus
Kokonaishinta:
Kokonaishinta: ( )
Kokonaishinta: --